Jet Transport Takeoff

Takeoff is one of the highest performance maneuvers of an entire flight. The aircraft is quietly positioned onto the runway, the throttles are advanced smooothly, and the engines roar to life.

Passengers feel the firm acceleration as they are pushed back into the cushions of their seats. The speed of the aircraft is considerable as the ground rushes backward in a blur until liftoff occurs. The nose of the plane climbs at an impressive angle upward toward the sky and objects on the ground fall rapidly away until they appear insignificant. Takeoff may appear to be an uncontrolled release of raw power, but it is actually a meticulously calculated, controlled, and evaluated event.

To fully understand takeoff performance, we must examine some basic physics. From a strictly physical interpretation, the jet engines perform work on the aircraft. When work is done on an object there is an increase in either potential or kinetic energy. On takeoff, there is no change in potential energy, so the work of the engines increases the aircraft's kinetic energy. The kinetic energy of an object is found by multiplying one-half its mass by the square of the velocity. Because work is defined as force multiplied by the distance through which the force acts and this is equal to the kinetic energy, the two equations can be set opposite one another.

Next we must remember Newton's second law of motion, which states that an applied force is equal to the mass of an object multiplied by its acceleration. By replacing the term for force with this identity, the equation becomes mass multiplied by acceleration, with distance equaling one-half the mass multiplied by the square of the velocity. As mass now appears on both sides of the equation, it is canceled, so acceleration multiplied by distance is equal to one-half the velocity squared. The final equation is found by solving for distance. Thus, takeoff distance is equal to the square of the velocity divided by twice the acceleration.

Because the takeoff distance is proportional to the square of the takeoff velocity, the takeoff distance would increase by a factor of four if the takeoff speed were doubled. The distance is also inversely proportional to the takeoff acceleration. The greater the acceleration, the shorter the takeoff distance. The more an aircraft weighs, the faster it must be moving to create adequate lift. This means the heavier an aircraft is, the more runway it will need. To minimize the takeoff speed and distance required, wing flaps and slats are used. The thrust of the engines provides the accelerating force.

On warm days, or when taking off from high-elevation airports, the reduced density of the air reduces the engines' thrust. The higher the elevation and temperature, the higher the power setting of the engines on takeoff.

It is comforting to know that according to Federal Aviation Regulations the aircraft must be able to climb to an altitude of 35 feet by the end of the runway or clearway even if one engine is not working. Is it any wonder why transport aircraft can take off and climb with such impressive strength? So on your next takeoff, relax and enjoy the exhilarating acceleration as the aircraft fulfills its need for speed.

Return to Feature Articles