Airframe and Powerplant Certification Program Tools
List |
GENERAL TOOL KIT - DESCRIPTION
OF CONTENTS
(This kit is required at the start of the A & P Certification Program)
|
|
1. Duckbill pliers, 7 3/4" long
|
33. Double point scribe
|
|
2. Diagonal cutting pliers, 6 1/3" long
|
34. Phillips screwdriver No. 1, 6 1/4" long
|
|
3. Needlenose Pliers, 6" long
|
35. Standard screwdriver
|
|
4. Slip joint pliers, 6" long
|
36. Aviation snip set(straight, right, left cut)
|
|
5. Adjustable joint pliers, 9 1/4" long
|
37. Drill bit, 3/16"
|
|
6. Vise grip pliers, 7" long
|
38. Drill bit, 5/16"
|
|
7. Center punch, 5" long
|
39. Drill bit, 7/16"
|
|
8. Pin punch 3/32" diameter
|
40. Drill bit, 1/8"
|
|
9. Pin punch 1/8" diameter
|
41. Drill bit, 3/8"
|
|
10. Pin punch 5/32" diameter
|
42. Drill bit, 3/32"
|
|
11. Pin punch 3/16" diameter
|
43. Drill bit, 5/32"
|
|
12. Pin punch 1/4" diameter
|
44. Drill bit, 1/4"
|
|
13. Chisel, 1/2" wide x 5 1/2" long
|
45. #03 Twist drill
|
|
14. Ballpeen hammer, 8 oz.
|
46. #21 Twist drill
|
|
15. Plastic tip hammer, 16 oz.
|
47. #22 Twist drill
|
|
16. Hacksaw for 10-12" blades
|
48. #27 Twist drill
|
|
17. Hacksaw blades (1232) 2 ea, 24 tooth
|
49. #29 Twist drill
|
|
18. Hacksaw blades (1224) 2 ea, 32 tooth
|
50. #30 Twist drill
|
|
19. Flat file, 10"
|
51. #31 Twist drill
|
|
20. Half round file, 10"
|
52. #40 Twist drill
|
|
21. Round file, 10"
|
53. #41 Twist drill
|
|
22. Flat file, 6"
|
54. #51 Twist drill
|
|
23. 4" file set
|
55. #11 Twist drill
|
|
24. Adjustable file handle
|
56. Letter Q twist drill
|
|
25. 6" dividers
|
57. Letter I twist drill
|
|
26. 6" rule
|
58. Letter F twist drill
|
|
27. 10' flexible steel tape, 3/4" blade
|
59. Tool Bag/Box
|
|
28. Combination square
|
60. Flashlight
|
|
29. Safety glasses/goggles
|
61. Inspection mirror
|
|
30. Hearing Protection, ear muffs (Must withstand a min. of 23 decibels)
|
|
|
31. 6" adjustable wrench
|
|
|
32. 10" adjustable wrench
|
|
Tools on the above list may be purchased through the Campus Bookstore as a complete kit. The general tool kit includes a tool "bag". A tool "box" may also be purchased for an additional cost. Required tools not included in the general tool kit, but also available through the
Campus Bookstore are:
- Digital Multimeter with 50,000 OHMS/Volt DC - 10,000 OHMS/Volt AC capablility
- Electronic parts kit
- Calculator: TI-30Xa
ADVANCED TOOL KIT - DESCRIPTION OF CONTENTS
(This kit augments the general kit and will be required at the start of the Airframe curriculum)
|
| 1. Standard screwdriver, 4" |
26. 3/8" drive 12-pt socket, 3/4" |
| 2. Standard screwdriver, 6" |
27. Tool control for sockets |
| 3. Standard screwdriver, 8" |
28. 1/2" drive deep-well spark plug socket, 6 pt |
| 4. #2 Phillips screwdriver, 4" |
29 3/8" drive flex handle |
| 5. Combo wrench 3/8" |
30. 3/8" drive 6-p socket, 7/16" |
| 6. Combo wrench 7/16" |
31. 3/8" drive 12-pt socket, 13/16" |
| 7. Combo wrench 1/2" |
32. 3/8" drive 6-pt socket, 9/16" |
| 8. Combo wrench 9/16" |
33. 3/8" drive 6-pt socket, 7/8" |
| 9. Combo wrench 5/8" |
34. 3/8" to 1/4" adapter |
| 10. Combo wrench 11/16" |
35. 1/4" to 3/8" adapter |
| 11. Combo wrench 3/4" |
36. 3/8" to 1/2" adapter |
| 12. Combo wrench 7/8" |
37. Torx T-20 bit or screwdriver |
| 13. Combo wrench 15/16" |
38. 1/4" drive socket wrench set |
| 14. Combo wrench 1" |
39. 1/4" drive flex handle |
| 15. Combo wrench 1/4" |
40. Allen wrench set: .028", .035",
3/64", 1/16", 5/64", 3/32",7/64", 1/8",
9/64", 5/32", 3/16", 7/32", 1/4", 5/16",
3/8" |
| 16. Combo wrench 5/16" |
| 17. Tool control for combo wrenches |
41. Feeler gauge, tapered leaf ..0015-.025 |
| 18. Combo ignition wrench set |
42. Flexible mag pick-up tool |
| 19. 3/8" drive ratchet set w/ext. |
43. Stripper for wire, size No. 14-22 |
| 20. 3/8" drive 12-pt socket, 3/8" |
44. 1/4" drive long shank driver |
| 21. 3/8" drive 12-pt socket, 7/16" |
45. Plastic scribe |
| 22. 3/8" drive 12-pt socket, 1/2" |
46. 1/2" to 3/8" adapter |
| 23. 3/8" drive 12-pt socket, 9/16" |
47. Seal extractor set |
| 24. 3/8" drive 12-pt socket, 5/8" |
48. 40w soldering iron |
| 25. 3/8" drive 12-pt socket, 11/16" |
|
| |
|
|
